OPERATOR SAFETY & MECHANICAL PROTECTION
Many safety conscious companies are insisting on lift table bellows in order to stay up to date with today's safety standards.
By providing a physical barrier, our lift table bellow covers help prevent injury due to hands, clothing or feet being accidentally caught in the lift table's pinch points. Protecting the lifting mechanism from contaminants such as dust, dirt, water and foreign objects, minimizes downtime and maintenance costs and extends the life of the unit.Enclosures & Facility Safety Brochure Download Quote Request
(For a quick quote request, use the form at the bottom and let us know your required length, width, extended height, and compressed height of the bellow.)
- SINGLE OR MULTIPLE SIDED
one, two, three and four sided lift table skirts are available for Lift, Tilt, and Lift and Tilt tables
- PREMIUM QUALITY VINYL COATED POLYESTER
the 3” wide material is welded together at each corner before sewing to ensure perfect 90 degree corners and uniformity
- MESH BREATHING FABRIC
on four-sided units, a mesh breathing fabric is sewn into opposite sides on a convolution near the top, to allow for the influx & expulsion of air as the enclosure cycles up & down
- EXTENSION STRAPS
eases pressure on the stitching by creating uniform extension at each convolution
- GALVANIZED MOUNTING FLATBAR
flatbar is included, if required, for installation into collars which can be located two ways:
1. Sewn to the inside dimension of the enclosure in which case the body will hang outside the outside dimension of the table.
2. Sewn to the outside dimension of the enclosure in which case the body will hang inside the outside dimension of the table.
- MAINTENANCE STRAPS
to hold the enclosure up against the underside of the table for ease of access when performing maintenance.
for retrofits where the lift table skirt may not be easily slipp ed over the table
- HOOK & LOOP MOUNTING
instead of flatbar
- HI-TEMPERATURE FABRIC
specialty fabrics are in stock for unique applications
- RESTRICTED SPACE & LOW RETRACTION
although 3” convolution width is standard, almost any width can be fabricated to satisfy special situations.